Dominator Track Systems
DOMINATOR® Track Systems are specially designed to fit nearly all common passenger vehicles up through the full-size ½ ton series, and also some of the lighter ¾ ton and 1 ton series vehicles, with 4, 5, 6, 7 or 8 bolt hubs. Although Dominator® track systems can be used year round and in almost all types of terrain, their primary purpose, and best performance, is in snow and ice, or similar terrains, which require exceptional flotation and traction.
In most cases Dominator® tracks install in less than one hour with no other modifications necessary to the vehicle. The tracks may then be removed just as easily, restoring the vehicle to its original state.
Dominator® tracks move almost effortlessly so even the smallest engines have no trouble powering them. This is accomplished with our exclusive design which minimizes resistance and drag allowing nearly all of the engine’s power to transfer directly to the ground. Dominator® tracks are practically maintenance free, allowing convenient and reliable operation in even the worst weather conditions and most challenging environments.
Dominator® frames are fabricated from T-1 grade steel providing superior strength with minimal weight. Our special drive drums utilize a self-cleaning design which prevents ice and mud from accumulating. Bolt patterns can be changed at any time by using adapters, so you can swap one track system between multiple vehicles.
Dominator® Tracks are designed for use in snow, slush, ice, mud, marsh, swamp, wet terrain, and even on dry ground at lower speeds. Dominators® are the lightest on the market at about 180 lbs each, allowing for easy, one-person installation. Dominators provide excellent floatation, reducing the vehicle’s ground pressure to less than 2 pounds per square inch, making it nearly impossible to get stuck, even in the deepest snow or mud. Plus, Dominators® will add ground clearance to your vehicle by an average of 6″ depending on the height of your original tires. For instance, Dominators® raise most Chevy Blazers by 9″ making the vehicle’s height, at center of hubs, 21″ from the ground.
Dominators® use the highest quality 121″ x 15″ snowmobile tracks, bogie wheels, and slides. These snowmobile industry parts hold up very well on the Dominator® track systems. For instance, we have seen rubber tracks which have logged thousands of miles and only exhibited minimal signs of wear–they basically still looked like new.
All of our metal components (frames, rails and drive sprockets) are made from high quality American steel, produced in Northern Michigan. And all of the wear items (tracks, bogie wheels, slides and bearings), are available from your local snowmobile dealers and auto parts stores, so there is no need to order specialized replacement parts from us. The parts that are specialized, such as the frames, rails and drive wheels, are designed to last a lifetime and are unlikely to ever need replacing. All of our steel components are protected by a powder coated finish to provide years of corrosion free service. And Dominator® track systems are backed by our comprehensive 1 year warranty and a 30 day money back guarantee!**
XL option for rear axle
XL option all around
Frame HD upgrade (for 3/4 ton and 1 ton, with adapters)
Bogie HD upgrade, per system
Tracks, ICE ATTACK studded, per rubber track
Tracks, 1” tall, per rubber track
Drive sprockets, for rear axle
Lateral support brackets, per axle
New accessories are available. Please inquire for more info.
The YMW recommended Track Package for HD Grooming Includes:
- XL’s on the Rear set
- Frame HD upgrade (if 1 ton vehicle)
- Bogie HD upgrade
- ICE ATTACK tracks
- Drive Sprockets in the Rear set.
This will provide a robust Track-Package for HD Trail Grooming usage.
Please check back